Publicité
The cabinet can be installed freestanding, against a wall or COMPACT 200 can be built
under a worktop.
The cabinet must have sufficient ventilation and free air circulation beneath, above and
behind the cabinet. There must be a minimum clearance of 30 mm above the cabinet, and
20 mm at the sides.
Fig. 5
Optimizing the energy consumption
Correct set up gives the most effective operation.
The product should be located in a dry and adequately ventilated room.
To ensure efficient operation, it may not be placed in direct sunlight or against heat-
emitting surfaces. The product is designed to operate in an ambient temperature
between +16 C and +30°C.
Do not keep the door open for too long.
Do not set the temperature setpoint too low.
The product should be placed as close as possible up against the wall.
765042402
Rev. 005
32
Publicité
