Application
Floor cleaning
The Round Cleaner is particularly suitable for cleaning plane surfaces like
carriage gateways, terraces etc.
Mount the Round Cleaner instead of the spray lance to the high-pressure gun of
your HP-cleaner. Place the Round Cleaner to a non-sensitive surface, e.g. asphalt.
When cleaning sensitive surfaces try out the Round Cleaner on a barely visible
spot first and adjust the pressure so that the surface is not damaged.
Do not exceed max. pressure (see technical data)
max. angle 45°
16
Taking out of operation
Taking out of operation
1.
Switch off the high pressure cleaner
2. Cut off the water supply
3.
Open the trigger gun with safety catch briefly until the pressure is released
4. Apply safety catch on the trigger gun
5.
Remove Kränzle Round Cleaner
6. Check if the rotor is tangled with threads etc.
7.
Use a paper clip to check if the nozzles are clogged
(siehe kleine Reparaturen selbstgemacht)
Cleaning and care
Put the Round Cleaner on to the floor in such a way that the splash protection
brush cannot be deformed due to rough ground.
EN
17