Application - Kränzle 135302 Manuel D'utilisation

Application

The foam injector dispenses the cleaning agent and supplies it to the water
jet of the high-pressure cleaner. When exiting from the nozzle the mixture is
foamed and ready to be applied on the surface to be cleaned.
The foam injector is suitable for easily cleaning all surfaces such as paint, glass,
stone and wood. Ideal for vehicles, conservatories, garden furniture, facades,
staircases, caravans, paths, gateways, walls, jalousies, terraces etc.
Procedure:
Fill the transparent container of the foam injector with a cleaning agent which is
suitable for foaming and application with high-pressure cleaner. The filling level of
the container for the cleaning agent must not exceed the top line.
As a medium, just fluids of group 2 of the pressure equipment directive
may be used. In case of doubt please contact the company Kränzle.
The foam injector is not suitable for foaming with strong acids
(pH value < 4), e.g. formic acid, hydrofluorig acid etc.
Please read the safety instructions and safety data sheets for the clea-
ning agent and observe the respective safety and processing regulations.
For the current safety data sheets of Kraenzle cleaning agents please
refer to the internet under www.kraenzle.com. Do not mix cleaning
agents with eachother.
Instead of the cleaning lance please assemble foam injector at the trigger gun
with safety catch of your high-pressure cleaner. Always wear suitable protective
clothing and gloves when working with the foam injector.
Foam injector with quick release nipple Foam injector with screw fitting
GB
21