Small Repairs - Do It Yourself; Warranty - Kränzle UFO light Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Small repairs - do it yourself

Problem
No water comes from the nozzle but the pressure gauge shows full pressure.
Cause
Most probably the nozzle is clogged.
18
Straighten a paper clip.
Clean the nozzle with the straightened
paper clip.
Rinse the high-pressure hose.
And you can proceed with the
high-pressure cleaning as before!

Warranty

Warranty
Our warranty obligation is understood to exclusively cover material and
manufacturing defects, wear is not covered by warranty.
The machine is to be operated in conformity with this Operating manual. The
operating manual is deemed to be part of the warranty provisions. This warranty
shall only apply on condition of proper use of original-Kränzle component parts
and original-Kränzle replacement parts.
With regard to legal warranty claims, the limitation periods of the respective
countries shall apply.
In the event of any warranty claims, please have your accessories and purchase
voucher ready before contacting your local dealer or the nearest authorized
customer service point, which you can also fi nd in the internet under
www.kraenzle.com.
The machine is designed for private purposes only; no warranty shall be provided
in case of industrial use.
In case of any modifi cations on the safety installations or in case of exceeding
the temperature and speed limit, any warranty claims shall become invalid - this
shall also apply to use of wastewater as well as any other faulty or inappropriate
operation of the machine.
Pressure gauge, nozzle, valves, sleeves, high pressure hose and spray equipment
are wear parts and are not covered by the warranty obligation.
EN
19

Publicité

Table des Matières
loading

Table des Matières