Publicité
2.2 Connecting your appliance
The technical specifications of your radiator are shown on the nameplate at the
bottom of the appliance.
Please take note of these before installing the appliance.
IP: level of protection against ingress
IP X4
of water
xxxV — xxxxW: voltage and power
O] CE
230V ~ xxx W 7
required for installation
=
|
XXX-XXX-XXX-XX+————-
Appliance reference number
Class IT: double insulated
OF: XXXXXXXXXX
OF: serial number
When connecting the appliance to the mains, you must ensure that the following
requirements are met:
- the voltage marked on the nameplate
- standard colour coding (brown: live; blue or grey: neutral; black: Pilot Wire.
NOTE Your appliance is equipped with a pilot wire for connection to a Pilot Wire pro-
| gramming base unit (not supplied with the appliance).
The flexible cable supplied with the appliance is designed to be connected to the
mains via a junction box that must be placed behind the appliance, with no need
for a plug.
In a kitchen or bathroom, the junction box must be positioned at least 25 cm
from the floor.
IMPORTANT If the Pilot Wire is not connected, it must be insulated for safety reasons.
Under no circumstances must it be connected to earth.
Publicité
