Télécharger Imprimer la page

Aiwa NSX-D7 Mode D'emploi page 16

Publicité

Up to 30 tracks can be programmed from any of the inserted
disc.
1
2,3
2
5
44,W
Use the remote control
1
2
3
To change the programmed
tracks
Clear the program and repeat all the steps again.
To
play the programmed tracks repeatedly
After programming
the tracks,
press RANDOM/REPEAT
repeatedly until =
appears on the display.
m
During programmed play, you cannot perform random play,
check the remaining time, and select a disc or track. "Can't
USE is displayed if you attempt to select a track or random
play.
c "FULL" is displayed if you attempt to program more than 30
tracks.
Press PRGM twice in stop mode.
PRGM indicator lights upon the display.
PRGM
When PRGM is pressed once in step 1, the unit enters
KARAOKE PROGRAM (page 24).
Press DISC DIRECT PLAY, then press one of the
numbered buttons 1-5 within 3 seconds to select
a disc.
Go to the next step when the tray stops rotating.
Press the numbered
buttons
O-9 and +10 to
program a track.
Example:
To select the 25th track, press +1O, +1O and 5.
To select the 10th track, press +10 and O.
Program ~umber
Total number of
selected tracks
Total playing time of
the selected tracks
4 Repeat steps 2 and 3 to program other tracks.
5 Press 4>
to start play.
To check the program
Each time +
or -
is pressed in stop mode, a disc number,
track number, and program number will be displayed.
To clear the program
Press
CLEAR in stop mode.
To add tracks to the program
Repeat steps 2 and 3 in stop mode. The track will be programmed
after the last track.
1 ~
ENGLISH

Publicité

loading