Publicité
Figure 1.
Figure 2.
1. Remove Center Underbody Panel – Figure 1:
Using an 8mm or 10mm socket, remove (10) screws from center underbody panel.
Using a 10mm or 12mm socket, remove (2) plastic hex nuts from center underbody panel.
2. Remove Left and Right-Hand underbody Panels – Figure 2:
Using an 8mm socket, remove (10) screws from Left and Right-Hand underbody panels.
Using a 10mm or 12mm socket, remove (4) plastic hex nuts from underbody panels.
©2024 Horizon Global Corporation. - Printed in Mexico
NOTE: To gain access to hitch mounting area,
remove (3) underbody panels as shown.
Sheet 3 of 12
Installation Instructions
PART NUMBERS: 76653, 84653, CQT76653
L C of Vehicle
3-1/2"
3"
Figure 3.
76653N
2-1/2"
Bottom
Bumper Panel
Area to Trim
Always wear SAFETY GLASSES
when installing hitch
8-1-24
Rev. A
Publicité
