Publicité
1. Align the lift ribs on the battery pack with the
grooves in the battery compartment.
2. Push the battery pack into the battery compartment
until the battery pack locks into place.
3. When you hear a click, the battery pack is installed.
3.7
REMOVE THE BATTERY PACK
Figure 2.
1. Push and hold the battery release button.
2. Remove the battery pack from the machine.
4
OPERATION
WARNING
Always wear eye protection.
WARNING
Do not use any attachments or accessories not
recommended by the manufacturer of this product.
4.1
START THE MACHINE
Figure 5.
1. Push the lock-out button to the left side to unlock the
switch trigger.
2. Pull the switch trigger.
WARNING
Before you use the machine, wait until the blade gets
to fully speed.
4.2
STOP THE MACHINE
Figure 5.
1. Release the switch trigger.
4.3
OPERATE THE MACHINE
Figure 6 - 9.
1. Hold the machine firmly in front of and clearly away
from the operator.
2. Put the base assembly against the work, then move
the blade into the work.
3. Make sure that the blade is clear of any foreign
material and the material to be cut is held tightly.
4. Small work pieces should be tightly clamped in a
vise or with clamps to the work bench or table.
NOTE
Do not force. Use only enough push the blade.
Excessive pressure can cause bending or twisting of
the blade that may result in broken blades.
English
5
MAINTENANCE
Do not let brake fluids, gasoline, petroleum-based
materials touch the plastic parts. Chemicals can
cause damage to the plastic, and make the plastic
unserviceable.
Do not use strong solvents or detergents on the plastic
housing or components.
Remove the battery pack from the machine before
maintenance.
5.1
CLEAN THE MACHINE
The machine must be dry. Humidity can cause risks of
electrical shocks.
•
Clear the unwanted material out of the air vent with
a vacuum cleaner.
•
Do not spray the air vent or put the air vent in
solvents.
•
Clean the housing and the plastic components with
a moist and soft cloth.
6
TECHNICAL DATA
Voltage
No Load Speed
Stroke Length
Weight without battery
Battery model
Charger model
Measured sound pressure
level
Measured sound power
level
Vibration
5
CAUTION
CAUTION
WARNING
CAUTION
24 V
-1
0-2700 min
28 mm
2.74 kg
G24B2 / G24B4 and other
BAG series
2913907 and other CAG
series
89.2 dB(A), K
= 5 dB(A)
pA
100.2 dB(A), K
= 5
wA
dB(A)
2
26.14 m/s
, K = 1.5 m/s
EN
2
Publicité
