Attaching The Mixing Bowl With The Kneading Disc - Micromaxx MD 15482 Mode D'emploi

7.6. Attaching the mixing bowl with the kneading
disc
1) Place the drive rod onto the stand
housing.
2) Place the mixing bowl onto the
drive rod and screw it onto the stand
housing in a clockwise direction so
that the handle is then pointing to
the right.
3) Place the blade adapter onto the
drive rod.
4) Place the kneading disc onto the
blade adapter. Ensure here that
the two slots on the kneading disc
fit onto the two tabs on the blade
adapter.
5) Place the splash guard lid onto the
mixing bowl so that the catches
on the lid engage with the corre-
sponding slots on the mixing bowl.
6) Twist the splash guard lid onto the
mixing bowl until it closes tightly
and the protrusion on the lid is fully
aligned with the handle on the
mixing bowl. If this is not done cor-
rectly, the safety contact on the base
will not allow operation.
 Use the pusher to close the lid or to
insert food through the feed chute.
NOTICE!
Safety contact on the mixing bowl
The food processor cannot be operated if the mixing bowl is
incorrectly fitted. If incorrectly fitted, the safety contact on the
housing edge will prevent operation.
DE
EN
FR
NL
43 of 108