Publicité
Key:
Label error length
Synchronization
Key:
Flip label
Key:
Rotate label
Key:
Rotate label in degrees
Key:
Alignment
Device Settings
Keys:
,
,
,
Language
Key:
External parameters
Key:
Hotstart
Key:
Codepage
In case an error occurs, indication after how many mm a message appears in the display.
Value range: 1 ... 999 mm
On: If a label is missed on the liner an error message is displayed.
Off: Missing labels are ignored, i.e. it is printed into the gap.
The axis of reflection is in the middle of the label. If the label width was not transferred to the
printer, automatically the default label width i.e. the width of the printhead is used. It is
recommended to use labels with the same width as the printhead. Otherwise this can cause
problems in positioning.
According to standard the label is printed ahead with a rotation of 0°. If the function is
activated, the label is rotated by 180° and printed in reading direction.
Corresponding to the parameter Rotate label, the label can be turned in 90° steps.
NOTICE!
Only printer internal objects (text, lines and barcodes) can be turned. The rotation
of graphics is not possible.
The adjustment of label is effected only after 'flip/rotate label', i.e. the adjustment is
independent of the functions flip and rotate label.
Left: The label is aligned at the left-most position of printhead.
Centre: The label is aligned at central point of printhead.
Right: The label is aligned at right-most position of printhead.
Selection of language in which you want to display the text in the display.
At the moment the following languages are available: German, English, French, Spanish,
Finnish, Czech, Portuguese, Dutch, Italian, Danish, Polish, Greek, Hungarian, Russian, Chinese
(option), Ukrainian, Turkish, Swedish, Norwegian, Estonian.
Label dimension only: The parameters for label length, gap length and label width can be
transferred to the printing system. All other parameter settings are to be made directly at the
printing system.
On: Sending parameters such as print speed and contrast via our layout creation software to
the printing system. Parameters which are set directly at the printing system before are no
longer considered.
Off: Only settings made directly at the printing system are considered.
On: Continue an interrupted print order after switching on the printing system anew.
Off: After switching off the printing system the complete data is lost.
Indication of the font used in the printing system. The following possibilities are available:
Codepage 437, Codepage 850, Codepage 852, Codepage 857, Codepage 1250, Codepage
1251, Codepage 1252, Codepage 1253, Codepage 1254, Codepage 1257, WGL4.
Please find the tables referring to the above mentionned character sets on our website.
English
Vita V
99
Publicité
