Publicité
.2
INSTALLATION
CHOICE OF LOCATION AND FITTING
This appliance must be installed in a
cabinet column as shown in the installation
diagram (fig. B-C-D).
Do not use your appliance immediately
(wait for about 1 to 2 hours) after
transferring it from a cold place to a warm
place, as condensation may cause a
malfunction.
Centre the oven in the cabinet so as to
ensure a minimum gap of 10 mm between
x1
x1
x2
3.5 x 9.5 mm
x2
4 x 13 mm
A
the appliance and the surrounding unit.
The material of the unit supporting the
appliance must be heat-resistant (or
covered with a heat-resistant material).
For greater stability, attach the oven to
the unit with 2 screws through the holes
provided in the side panels.
10
B
≥
100
mm
450
≥100 mm
Publicité
