cecotec BOLERO FLUX DT 608010 GLASS BLACK A++ Manuel D'instructions page 30

ENGLISH
Grease falls out of the The filters are very dirty.
aluminium filters
The kitchen hood The fan is damaged, causing
vibrates the kitchen hood to vibrate
when extracting air.
The engine is not securely
fastened.
The kitchen hood is not
securely fastened.
The kitchen hood The distance between
is not sufficiently the kitchen hood and the
extracting cooking surface is too large.
There is too much
ventilation in the room due
to open doors or windows.
The kitchen hood is Fastening screws are not
tilted tightened properly.
Plastic plugs are not
tightened properly.
If none of these situations match your problem, do not attempt to disassemble, or repair the
appliance by yourself. Repairs carried out by unqualified persons may result in injury or serious
malfunctions. Contact the official Cecotec Technical Support Service. The repair must be carried
out by an authorised technician, and you must use only original spare parts.
Unauthorised self-maintenance or maintenance will affect the safe use of the product and the
application of the warranty policy.
NOTE:
Any electrical repairs to this appliance must conform to local and/or state laws.
Please contact the official Cecotec Technical Support Service in case of doubt and
before carrying out any of the above operations. Always disconnect the device from
the power supply when opening it.
BOLERO FLUX DT 608010 GLASS BLACK A++/WHITE A++
58
BOLERO FLUX DT 908010 GLASS BLACK A++/WHITE A++
Clean or replace the aluminium filters
immediately
Please contact the official Cecotec
Technical Support Service to replace
the fan.
Fix the engine correctly.
Fix the kitchen hood correctly.
Readjust the distance.
Relocate and reinstall the kitchen hood.
Reposition the kitchen hood
horizontally and tighten the screws.
Reposition the kitchen hood
horizontally and tighten the plugs.
7. TECHNICAL SPECIFICATIONS
Product reference:
02847_ Bolero Flux DT 608010 Glass Black A++
02848_ Bolero Flux DT 608010 Glass White A++
02929_ Bolero Flux DT 908010 Glass Black A++
02930_ Bolero Flux DT 908010 Glass White A++
All technical information is available on the public website of the European Product Register
for Energy Labelling (EPREL):
eprel.ec.europa.eu/screen/home
Regulation (EU) 65/2014
EU Directive 2010/30/EU
Rated voltage: 220-240 V~
Rated frequency: 50 Hz
Total power: 215 W
Motor: 210 W
Light: 2 x 1.5 W + 2 x 1 W
800 m³/h air flow
Bulb type: rectangular LED light
Bulb dimensions: 75 x 32 mm
ILCOS Code D: DBL-1.5-S-75/32
Symbol
Model reference
Annual energy consumption AEC
Time increment factor f
Fluid dynamic efficiency FDE
Energy Efficiency Index (EEI) EEI
Measured airflow at maximum Q
efficiency point
Air pressure measured at maximum P
efficiency point
ENGLISH
Value
02847 / 02848
02929 / 02930
40.1
hood
0.6
38.4
hood
35.7
hood
491.1
BEP
572
BEP
BOLERO FLUX DT 608010 GLASS BLACK A++/WHITE A++
BOLERO FLUX DT 908010 GLASS BLACK A++/WHITE A++
Unit
kWh/a
m /h
3
Pa
59