Publicité
EN - Chime Kit Setup
Determine the type of doorbell chime you have in your home.
•
Mechanical: You will hear a classic ding-dong sound.
A mechanical doorbell is spring-loaded with levers and physical metal chimes.
•
Electronic: If your doorbell sounds more like a melody then you have an electric chime box.
The setup process is the same, but when wiring for a mechanical chime, stay clear of the metal
chimes or any of the moving components inside.
1.
Remove the cover panel of your existing doorbell chime
box.
2.
Loosen the screws labeled FRONT and TRANS. Do
not remove the screws and be sure to detach any
connected wiring.
3.
Connect the green terminal on the end of the included
Wire Harness to the Chime Kit.
4.
Connect the wiring from the Chime Kit to the FRONT
and TRANS connectors in the Chime Box. Ensure that
the existing wiring stays connected as well.
5.
Mount the Chime Kit to the inside of your Chime Box or
along the cover plate using the included double-sided
tape.
Ensure the Chime Kit and wires are not touching the
chimes or any of the moving components inside
the chime box or the doorbell chime will not sound
correctly.
Publicité
