Publicité
8.
Align the ends of your existing wiring and Connecting
Wires, place the Wire Caps over the exposed wiring, and
then twist the Cap clockwise to tighten.
9.
Push the wiring back into the wall. Make sure there is
enough space to fit the cable connectors and wire caps
into the hole in the wall.
10. Press the doorbell into the Mounting Bracket. You will hear
a 'click' when it secures into place.
11. Reconnect power at the breaker.
If your existing doorbell wiring is too short, replace the Connecting Wires with the provided Extension
Wire.
Device ID: LNWZ83569CCH
Screw Hole
Screw Hole
Publicité
