Publicité
–
Pairing
–
Settings
–
Picture
FIG. 12
2.
When the pairing menu opens, press the
power switch button to start the pairing.
FIG. 13
3.
Press the button on the camera (No.
6 - FIG. 11) to pair the camera with the
monitor. The text "Paired" is shown when
the pairing has been correctly completed.
FIG. 14
Image settings
Press the up or down arrow to go to settings.
–
Auto display
–
Mirror
–
Version
FIG. 15
Auto display
Press the power switch button to select
Camera 1, Camera 2, or Split.
–
Cam 1
–
Cam 2
–
Split
FIG. 16
Mirror
Select Mirror to go to the options Normal, Up,
Flip, Up & Flip, select the required option and
press the power switch to confirm.
–
Normal
–
Up
–
Flip
–
Up & Flip
FIG. 17
Version
Select Version and press the power switch to
show information on the programme version for
the monitor and camera. Paired channels can
be deleted on the version information image.
Press the up arrow button for 5 seconds to delete
paired channels. Use this function carefully – two
paired channels are deleted at the same time
and must be recoded after deletion.
FIG. 18
Picture
Screen image for picture settings. Press the
power switch to select Brightness, Contrast or
Saturation.
–
Brightness
–
Contrast
–
Saturation
FIG. 19
Brightness
Select Brightness, press the power switch
to open the setting and then adjust the
brightness with the up or down arrow button.
FIG. 20
Contrast
Select Contrast, press the power switch to open
the setting and then adjust the contrast value
with the up or down arrow button.
FIG. 21
Saturation
Select Saturaiton, press the power switch to
open the setting and then adjust the saturation
value with the up or down arrow button.
FIG. 22
EN
33
Publicité
