Publicité
Clamp
(Supplied with the
wire harness)
Make sure the clamp is
in the position shown in
the figure.
Pass under
Clamp (2)
the hook.
(Accessory)
Secure relay harness
(small) (6) to the hook.
* In doing so, try not to
strain the relay
harness (small) (6).
Clamp (2)
(Accessory)
Bundle the wire harness of the corner cover
with operation display (5) and any of the lead
wires (any 1 of them) with protective tube.
15
Wire clamp (7)
(Accessory)
Bend the wire harness to
prevent it from moving, and
fasten securely.
Corner cover assembly (5)
Wire harness
(Accessory)
Figure 17
X40A
Wire harness of corner cover
Pass through
with operation display (5)
the edge saddle.
(Accessory)
Figure 18
Relay harness
(Small) (6)
(Accessory)
Pass through
the wire clip.
Field-wired path
(Low current side)
Field-wired path
(Low current side)
Pass through
the wire clip.
Pass through wiring
through-hole 2.
English
Publicité
