3. Pass the power supply wires (black and white) and the earth wire (green or yellow) through wiring
through-hole 1. (Refer to Figure 9.)
(1) Turn the streamer air purifier unit over.
(2) Pass the power supply wires (black and white) and the earth wire (green or yellow) through wiring
through-hole 1.
(3) Push the power supply wires (black and white) and the earth wire (green or yellow) into the
UV streamer air purifier unit.
(This is to prevent the power supply wires (black and white) and the earth wire (green or yellow)
from getting caught between the UV streamer air purifier unit and the indoor unit.)
Power supply wires
Pleated filter (1)
(Accessory)
9
Figure 5
Signal wire
Tape
Remove the tape (5 locations).
Figure 7
Hold this part.
Figure 8
Figure 6
Tape
Hook (Filter) 2 locations
English