DELETION OF LEARNED DATA FOR
A BUTTON
1.
Press the button for the type of appliance
TV/DVD/VCR/SAT/CBL/AUX at the same
time as the button
2.
Enter the digits 9910.
3.
Press the button data for which data is to
be deleted. The light flashes two times and
the data for the button is deleted.
4.
Repeat for other buttons for which data is
to be deleted.
5.
Press the learn button
DELETION OF LEARNED DATA FOR
AN APPLIANCE
1.
Press the button for the type of appliance
TV/DVD/VCR/SAT/CBL/AUX at the same
time as the button
2.
Enter the digits 9920.
3.
All the learned data for the appliance is
deleted.
4.
The light in the button for the type of
appliance flashes twice and then goes out.
DELETION OF LEARNED DATA FOR
ALL APPLIANCES
1.
Press any button for the type of appliance
TV/DVD/VCR/SAT/CBL/AUX at the same
time as the button
2.
Enter the digits 9930.
3.
All the learned data for all appliances is
deleted.
4.
The lights in the buttons for the type of
appliance flash twice and then go out.
.
to finish.
.
.
FACTORY RESET
1.
Press any button for the type of appliance
TV/DVD/VCR/SAT/CBL/AUX at the same
time as the button
2.
Enter the digits 9990.
3.
The remote control is reset to default
settings.
4.
The lights in the buttons for the type of
appliance flash twice and then go out.
CHECKING CODES
Used to check the four-digit code stored for a
specific appliance. Follow the instructions below:
1.
Press the button for the actual type of
appliance.
2.
Press the button
buttons 1, 2, 3, 4 at the same time.
3.
Release the buttons.
4.
The light in the button for the type of
appliance flashes the corresponding
number of time.
5.
For 0 the light flashes quickly 10 times.
The following is an example for the code 1029
1.
Press the button
button 1.
2.
The light in the button for the type of
appliance flashes once.
3.
Press the button
button 2.
4.
The light in the button for the type of
appliance flashes quickly 10 times.
5.
Press the button
button 3.
6.
The light in the button for the type of
appliance flashes 2 times.
7.
Press the button
button 4.
8.
The light in the button for the type of
appliance flashes 9 times.
.
and press one of the
and press the number
and press the number
and press the number
and press the number
EN
29