Publicité
EN
Controlling the programming
When the remote control is programmed with
the correct code, check that the buttons control
the television functions correctly.
Correction
If one or more of the buttons do not control the
functions correctly they can be programmed
individually with the learn function.
Programming of other appliances
Other appliances such as DVD players, video
recorders, satellite receivers etc., can be
programmed in accordance with the instructions
in the previous section.
NOTE:
Lists of all the available appliance codes can be
found in the Annex A and B.
LEARN FUNCTION
The remote control's learn function is used to
programme one button at a time to control the
relevant appliance in the same way as with the
original remote control. An example of learn
programming of CBL appliances is given below:
1.
Press the button
2.
Press the learn button
until the light in the button
3.
Hold the original remote control for the CBL
appliance pointed at the universal control
at at a distance of 3–5 centimetres with the
infrared transmitters pointing at each other.
4.
Press the button for the function to be
learned on the original remote control until
the light in the button
on the universal remote control. Release
the button.
28
once.
CBL
for 3 seconds
goes red.
CBL
starts flashing
CBL
5.
Press the button for the function to be
learned and programmed. The light in
the button
goes red to show that the
CBL
function has been learned. Repeat steps
3–5 to learn additional button functions. If
no buttons are pressed for 30 seconds the
red light will flash 2 times and go out.
6.
Press the learn button
programmed button functions. The red
light in the button
NOTE:
•
If the remote control is programmed
with a new appliance code all the
learned programming button
functions will be lost.
•
All buttons except for the MACRO button
and the buttons for the type of appliance
can be programmed with the learn
function.
Controlling the programming
When the remote control had been
programmed with the learn function, check that
the CBL appliance is correctly controlled.
Correction
If one or more of the buttons do not control the
functions correctly they can be programmed
again in accordance with the instructions above.
NOTE:
Other appliances can be learn programmed in
accordance with the instructions above. Press
the button for the actual type of appliance.
to store
goes out.
CBL
Publicité
