Publicité
Correction
If one or more of the buttons do not
control the functions correctly they can be
programmed individually with the learn
function.
Code programming with
automatic search
1.
Switch on the television to be controlled
with the remote control. Hold the remote
control in front of the television at
distance of no more than 1 metre.
2.
Press the buttons
remote control at the same time until the
red light goes on.
3.
Press the button
4.
The light in the button
show that the remote control is searching
for the correct code for the television.
5.
The television switches off when the
remote control has found the correct
code.
NOTE:
Press the button OK immediately when the
television switches off, otherwise the remote
control will continue to the next code.
6.
The code is stored when the button OK is
pressed. The light in the button
out.
NOTE:
The automatic search can be interrupted
without finding the correct code for the
television. In which case the light in the
button stops
flashing without the
TV
television switching off. It can take several
minutes to browse through all of the remote
control's code list.
and
on the
TV
.
flashes red to
TV
goes
TV
Controlling the programming
When the remote control is programmed with
the correct code, check that the buttons control
the television functions correctly.
Correction
If one or more of the buttons do not
control the functions correctly they can be
programmed individually with the learn
function.
Code programming with
brand search
1.
Switch on the television to be controlled
with the remote control. Hold the remote
control in front of the television at
distance of no more than 1 metre.
2.
Press the button
as the digit button from 0 to 9 that
corresponds to the television brand in
accordance with the list in Annex
the button when the light goes on.
3.
After 2 seconds the light in the button
will start to flash.
4.
When the television switches off, press the
button OK to store the code in the remote
control.
NOTE:
•
Press the button OK immediately when
the television switches off, otherwise the
remote control will continue to the next
code.
•
The automatic search can be interrupted
without finding the correct code for the
television. In which case the light in the
button
stops flashing without the
TV
television switching off.
at the same time
TV
A.
Release
EN
TV
27
Publicité
