Publicité
C O N N EC TI O N S
BOTTOM CONNECTIONS
•
6-port DMX connection plate (RJ45 or Terminal Block) or Cover Plate
•
Emergency Contact (3pin Terminal Block, Dry Contact or 12V). Set Normally Open or Normally
Closed with the DIP switch on the top.
Cover Plate (shown), or DMX connection plate
Terminal
connection plate for DMX In or Output
DMX CONNECTOR PLATES:
RJ45 DMX:
Connector Plate with RJ45 DMX Output connectors: Pin1: DATA+, Pin2: DATA -, Pin7+8; Ground
(ESTA Compliant) Carefully connect RJ45 cables to the respective ports.
L
1
2
3
Not connected
4
Not connected
5
Not connected
6
Not connected
7
TERMINAL DMX:
Connector Plate with Phoenix Screw Terminal, or Insulation Displacement Connectors (IDC): Pin 1:
ComC", Pin2: DATA-; Pin3: DATA+.
Pin
1
2
3
Note that Wire Guage is 20 to 22AWG.
To prevent damaging the ports, provide strain relief and support.
Blocks,
or
RJ45
Connection
Data +
Data -
Com
Connection
Com
Data -
Data +
Terminal
Blocks
11
Phoenix-3P
Connector
Publicité
