Publicité
1.
Specifications
Dimensions: 490 x 160 x 250 mm
Weight: 7 kg
Tank volume: 10,5 l.
Piston volume: 6,5 ml
Outlet connection: R 1/2"
Testing fluid: water
Maximum temperature: 50º C-120ºF
Maximum pressure: 120 bar. 1.720 psi. 12 Mpa.
2.
General information
Dear customer, congratulations for purchasing a SUPER-EGO product. The testing pump TP120 has been developed
and designed to meet the highest quality standards guaranteeing most stringent operation requirements.
A number of unique design features make the pump different from other testing pumps:
1. Double shut-off and purge valve system, to ease test pressure adjustment.
2. Combined ball head and monoblock aluminium shut-off valve system reducing risk of leaks in the system.
3. Distortion proof wear resistant polyamide piston.
4. Knock resistant weather and cold proof galvanised steel tank protected with epoxy coating (TP120).
5. Pressure gauges with readily available calibration certificates.
At present, a great number of installations for fluid-carrying pipes can be found depending on the type and nature
of the pipe materials. These can be of metal: steel, stainless steel, galvanised steel, aluminium, copper..., plastic
materials: PP, PE, PB, PVC, PE-X..., as well as composite materials such as Multi-layer. All these types of pipes can
be joined as a function of the material and the nature of the joint by means of welding, threads, mechanical joints
with bushings, using adhesives ...
No matter the nature of the joint, the type of material and the fluid to be carried, any installation must be liquid-
tight, tests being required.
Testing pump TP120 is a precision tool for testing installation tightness using water or oil as testing liquid, a
maximum testing pressure of 120 bar being possible.
Prior to starting the testing pump, please carefully read and follow these instructions:
3.
General safety
1. The position and operation of the controls must be studied prior to TP120 pump operation
2. The TP120 has been designed for specific applications. We strongly recommend that it SHOULD NOT BE
MODIFIED, nor used for other purposes.
3. Using only the liquids specified for the tests is utterly important for the integrity and durability of the
liquid-tight systems. NO acids or other corrosive liquids may be used for the tests. Use only clean water.
4. Check the pump for damaged or defective parts prior to pump operation. The pump MAY NOT BE USED
if pressure hoses or any other parts are flawed or broken.
5. Only original SUPER-EGO parts may be used for maintenance
8
ENGLISH
Publicité
