Publicité
Depending on the setting of the 'MODE' rotary switch the dimmer module will act as follows:
Mode
Description
Pressing the pushbutton will switch on the LED strip. When the set time expires the LED strip is switched off.
0
Pressing the pushbutton while the LED strip is already on will switch it off immediately.
Pressing the pushbutton will switch on the LED strip. When the set time expires the LED strip brightness will slowly diminish to be
1
completely off after 30 seconds. Pressing the pushbutton while the LED strip is already on will restart the timer.
A short push will switch on the LED strip (full brightness). Another short push when the LED strip is already on will switch it off.
2
Push and hold will dim the LED strip up to maximum or down to minimum brightness. The next push will dim in the opposite
direction When the set time expires the LED strip is switched off.
A short push will switch on the LED strip (brightness as memorized since last use). Another short push when the LED strip is
3
already on will switch it off. Push and hold will dim the LED strip up to maximum or down to minimum brightness. The next push will
dim in the opposite direction. When the set time expires the LED strip is switched off.
Operating the push button will turn on the LED strip to full intensity. Each time the push button is pressed within 5 seconds after the
4
previous operation the light intensity will modify with 25%. If the LED strip is on and the previous operation happened more than 5
seconds ago, the LED strip will turn off. When the set time expires the LED strip is switched off.
Pressing the pushbutton will slowly turn on the LED strip to full brightness. The duration to achieve maximum brightness is
5
determined by the 'TIME' switch. Pressing the pushbutton while the LED strip is already on will switch it off immediately.
Pressing the pushbutton will switch on the LED strip to full brightness. Pressing the pushbutton when the LED strip is on will slowly
6
decrease brightness until the LED strip is off. The duration to switch the LED strip to off is determined by the 'TIME' switch. Press-
ing the pushbutton during decreasing brightness will turn the LED strip back to full brightness.
Pressing the pushbutton will slowly turn on the LED strip to full brightness. Pressing the pushbutton when the LED strip is on will
7
slowly decrease brightness until the LED strip is off. The duration to achieve maximum brightness or to switch the LED strip off is
determined by the 'TIME' switch.
Remarks:
When the 'TIME' rotary switch is set to '0' the dimmer module will always work in instant control, no matter what operating mode is
set. On other words, the LED strip will light up as long as the pushbutton is pushed. When the 'TIME' rotary switch is set to 'F' the
dimmer module will not automatically switch off or the dimming speed will be maximal when the module is set to slowly on, slowly
off or slowly on/off mode.
ENGLISH
9
Publicité
