Publicité
2. Address selection
Every module in the system must have a unique address. When the Velbus
disable communication with the system.
Remove the cover
Set both 'ADDR' rotary switches to '0'.
ADDR = 00
®
is not used, the address must be set to '00' to
REMARK WHEN USING VELBUS:
Normally only 2 'TERM' terminators
must be used in a complete Velbus
installation. Usually this will be on
one module inside the distribution
box and on the module which is
physically located furthest from the
distribution box.
On all other modules, the terminator
must be removed.
ENGLISH
®
7
Publicité
