Publicité
ENGLISH
Stand-alone system
12/24V LED strip
DC output
12/24Vdc power supply
AC power
The dimmer module can be used in combination with a direct current power supply (12 or 24V) to
dim LED strips (12 or 24V).
The function of the connected pushbuttons is set via the 'Mode' rotary switch.
The switch-off time (or dim time in slowly on/off dimmer mode) is set via the 'Time' rotary switch.
®
The address must be set to '00' to disable communication with the Velbus
system.
6
Publicité
