Publicité
3.1 Main control panel
1- Output power indicator (approximated)
3- Output indicator 230V
5- Overload restart - Switch V-HZ-HOURS
7- Thermal circuit breaker for DC 12V
9- Ground wire connection
11- Thermal circuit breaker for 16A sockets
13- Start button
4. Checks before use
4.1 Battery connections (E-START models)
1. Remove the screw and open the cover for the battery access.
2. Connect the cable pressing the connectors, according to the figure below.
2- Overload indicator
4- Lack of oil alarm indicator
6- ECO mode switch
8- Socket DC 12V
10- Sockets
12-Digital display
43
Publicité
