Publicité
Operating instructions
2.4
Personal protective equipment
Missing or unsuitable personal protective equipment increases the risk of damage to health and injuries to
people.
The following protective equipment is to be provided and worn during work:
Protective clothing
Safety shoes
Define and use additional protective equipment depending on the application and the media:
Safety gloves
Eye protection
Ear protection
Wear the specified personal protective equipment for all work on the diverter valve.
2.5
Additional equipment and spare parts
Additional equipment and spare parts not conforming to the manufacturer's requirements can negatively
affect the operational safety of the diverter valve and cause accidents.
To ensure operational safety, use original parts or parts that conform to the manufacturer's require-
ments. If in doubt, have these confirmed by the dealer or manufacturer.
2.6
Adhere to the technical thresholds
If the technical threshold values for the diverter valve are not adhered to, the diverter valve may sustain
damage, accidents may be caused and people may be seriously injured or killed. Adhere to the thresh-
olds.
See section "4. Description of the diverter valve".
This product is designed for ≤500 loading cycles at pressure differences from zero to PN and any
number of loading cycles at pressure differences not exceeding 0.1 x PN.
2.7
Safety instructions
DANGER
Hazardous medium.
Escaping operating medium can lead to poisoning, burns and caustic burns!
Wear the prescribed protective equipment.
Provide suitable collecting containers.
WARNING
Harmful and/or hot/cold conveyed media, lubricants and fuels
Hazardous for persons and the environment!
Collect and dispose of rinsing medium and any residual media.
Wear protective clothing and a protective mask.
Observe legal regulations regarding the disposal of harmful media.
Risk of injury if maintenance work is done incorrectly!
Incorrect maintenance can lead to serious injury and considerable material damage.
Before the start of work, ensure there is sufficient room for doing the work.
Ensure the space around the work is tidy and clean! Parts and tools in loose piles or lying around are
hazard sources.
If parts have been removed, take care to assemble correctly and re-install all attachment items.
Before putting back into service, ensure:
All maintenance work has been carried out and completed.
There are no persons in the hazard area.
All covers and safety devices are installed and operating correctly.
CAUTION
Cold/hot pipelines and/or diverter valve.
Risk of injury due to thermal influences!
Insulate the diverter valve.
Attach warning signs.
Medium escaping at high speed and high/low temperature.
Risk of injury!
Wear the prescribed protective equipment.
14
Phone +49 4531 509-0
Publicité
