Publicité
Operation
Control Panel
Figure 5. Control Panel
1. Display: During normal operation, the display shows
cabinet temperature in degree Celsius as measured by
the primary sensor. When alarm and compressor are
active, the respective LEDs are displayed. Refer to the
table below for LED display symbols. A display code will
also be visible during the functioning based on the type of
alarm.
Note: "CFu" parameter under the display settings (diS) of
controller enables conversion to Fahrenheit or Celsius.
Access controller settings using password 990, refer Table 7.
Defrost LED
On Fixed: Defrost Active
Off: Defrost Off
General Purpose Freezers
Alarm LED
On Fixed: Alarm Present
Flashing: Alarm Silenced
Off: No Alarm
Compressor LED
On Fixed: Compressor Active
Flashing: Delay, Protection or
Activation Blocked
Off: No Alarm
Fan LED
On Fixed: Fan Active
Off: Fan Off
Operation |
13
Publicité
