Publicité
9192469
c.
Never use the cord to carry the tool.
d.
Place the electrical cord in a position that prevents it from coming
into contact with the tool and getting caught by the workpiece.
The cord should always stay behind the tool.
5.
Do not allow people, mobile equipment or vehicles to pass over
unprotected power cords.
a.
Position power cords away from traffic areas.
b.
Place cords in reinforced conduits or place planks on either side of
the power cord to create a protective trench.
UNPACKING
WARNING! Do not operate the tool if any part is missing. Replace the
missing part before operating. Failure to do so could result in a malfunction
and personal injury.
Remove the parts and accessories from the packaging and inspect for
damage.
Make sure that all items in the Identification Key are included.
Make sure that all items in the parts list are included.
IDENTIFICATION KEY
8
8 Gallon Portable Air Compressor
For technical questions call 1-800-665-8685
V1.0
Publicité
