Publicité
9192469
HANDLE
1.
Insert the 2 open ends of the handle (L)
into the handle brackets on the tank (Fig.
2-1).
2.
Align the holes in th e handle bracket with
the threaded holes in the handle.
3.
Attach the handle securely in place using
thumbscrews (Fig. 2-2).
OPERATION
1.
Position the air compressor near an
electrical outlet and on a hard, level
surface.
a.
The air compressor must be at
least 12 in. (Fig. 3-1) from any wall
or obstruction.
2.
Set the power switch (B) to the off position,
which is identified with a "O" shape.
3.
Turn the air pressure regulator knob (D)
counterclockwise fully until it stops.
4.
Connect an air hose (not included) to the
compressor' s air outlet (G) (Fig. 4).
5.
Close the drain valve (I) by turning it
clockwise (Fig. 5-1).
6.
Plug in the power cord (J).
7.
Set the power switch to the on position, which
is identified with an "I" shape.
a.
Pressure will build and then the motor
will stop automatically when it reaches
"cut-out" pressure.
8.
Turn the air pressure regulator knob clockwise
until the desired pressure is reached.
9.
When operation is complete, set the power
switch to the off position and unplug the
power cord.
10
8 Gallon Portable Air Compressor
For technical questions call 1-800-665-8685
V1.0
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Publicité
