Operating Mode - HAEGER HELI FAN Mode D'emploi

Electric
Motor
Blade Installation
The screws for installing the fan blades have already been screwed into the
motor housing. Unscrew them and remove them from the motor housing. Take
a fan blade and screw it to the motor housing using the two screws. Repeat the
process for the other two fan blades
IMPORTANT: Be careful not to support yourself on the fan blades, as these could
then become unbalanced and cause vibration or shaking of the fan.

Operating mode

The fan is equipped with a wall-mounted speed regulator which works by rotating
the knob to select from OFF to max rotation. Switch it in a clockwise or anti-
clockwise direction.
The speed regulator has six positions:
POS
0 OFF
2 Low Medium speed
4 High Medium speed
Instructions for use
Red
Capacitor
White
Black
Terminals
FUNCTION
Wall Control
Green/yellow
a)
b)
c)
Metal blade
POS FUNCTION
1 Low speed
3 Medium speed
5 High speed
English
Line (brown)
Neutral (blue)
Earth
7