Publicité
SECTION 7
Use and Care
CAUTION:
MAKE SURE POWER IS SWITCHED OFF AT SERVICE PANEL BEFORE
STARTING INSTALLATION.
Cleaning the Grill: Refer to instructions in Section 6 Completing the Installation, to
1.
remove grill and glass light lens. Use a mild detergent, such as dishwashing liquid,
and dry with a soft cloth. NEVER USE ANY ABRASIVE PADS OR SCOURING POWDERS.
Completely dry all parts before reinstalling. Refer to instructions in Section 6 Completing
the Installation, to reinstall grill and glass light lens.
2.
Cleaning the Fan Assembly: Wipe all parts with a dry cloth or gently vacuum the fan.
NEVER IMMERSE ELECTRICAL PARTS IN WATER.
A210572216 Rev. A 5-14
All manuals and user guides at all-guides.com
www.airkinglimited.com
CAUTION:
ALLOW BULBS TO COOL BEFORE REPLACING.
3.
Changing the Light Bulb: Disconnect power to the unit. Remove light lens from grill by
following the instructions in Step 3 of SECTION 6 - Completing the Installation. Replace
light bulb(s) with 60 watt maximum, type A19 medium base incandescent bulb(s).
4.
Reinstall the lens by reversing the instructions in Step 3 of SECTION 6 - Completing the
Installation.
4 of 4
Publicité
