Publicité
Codes
Meanings
E1
Longer inlet time.
Not reaching
E3
required
temperature
E4
Overflow
Failure of
E8
orientation
of distributary valve
Washing control
EC
system fails.
Failure of
communication
between main
Ed
circuit board
with display circuit
board
WARNINGS!
If overflow occurs, turn off th main water supply before calling service.
If there is water in the base pan because of an overfill or small leak, the water should be removed
before restarting the dishwasher.
Possible Causes
Tap is not opened, or water inlet
is restricted, or water pressure is
too low.
Malfunction of heating element
Some dishwasher parts are
leaking.
Open circuit or break of
distributary valve
PCB or motor fails.
Open circuit or break wiring for
the communication.
Possible Solution
Turn on the water tap.
Check the water inlet hose is
not blocked. Increase inlet
water pressure.
Contact the after-sales service
to replace the heating
element.
Contact the after-sales service
to repair and replace parts.
Contact the after-sales service
to repair and replace parts.
Contact the after-sales service
to repair and replace parts.
Contact the after-sales service
to repair and replace parts.
Publicité
