Publicité
6
•
Interruption of charging by the
utility company.
AC Charging
If equipped, a loss of AC power alert may sound
for a short time if AC power is lost for over one
minute. This sound alert can be turned off. See
your owner's manual.
AC Charge Cord Vehicle Plug
To Start AC Charging
1. Put the vehicle in P (Park).
2. Push the rearward edge of the charge port
door and release to open the door.
In cold weather conditions, ice may form
around the charge port door. Remove ice
from the area before attempting to open or
close the charge port door.
Without Super Cruise, With Super
Cruise Similar
3. Open the liftgate, lift the load floor cover,
and remove the charge cord.
4. Plug the charge cord into the electrical
outlet. To verify the charge cord status, see
your owner's manual. For instructions to set
cord limit settings for a charge session, see
your owner's manual.
5. Plug in the AC charge cord into the vehicle
charge port. Make sure the AC vehicle plug
is fully connected to the AC charge port. If it
is not properly connected, the vehicle may
not be charged.
Publicité
