Publicité
Leveling the appliance
If your appliance is not leveled, the door and magnetic seal alignment will be affected and
may cause a malfunction. Once the appliance is placed in its final location, adjust the
leveling feet at the front by turning them.
Cleaning before use
Wipe the inside of the appliance with a weak solution of bicarbonate of soda. Then rinse with warm
water using a damp sponge or cloth. Wash the baskets and shelves in warm soapy water and dry
completely before replacing them.
Reversible door
The side to which the refrigerator door opens can be altered on the right side to the left, if the place of
installation so requires.
1. Remove the screws (6) securing the top cover (7) and remove it
2. Remove the 2 screws (6) securing the right upper hinge (5) to the structure and remove.
3. Lift the door and place it on a padded surface to prevent scratching.
4. Remove the two screws (8) securing the lower hinge (2) and remove.
5. Remove the front foot (4) and pass to the right side
6. Before inserting the lower hinge (2) remove the plug (9) and reverse the direction of the lower
hinge. Then install the lower hinge (2) on the left side of the lower structure with two screws (8).
7. Fit the plug (9) in the lower hinge (2).
8. Place the door in the correct position ensuring that this is supported on the lower hinge (2).
9. Keeping the door in the closed position secure the upper hinge (5) on the left side of the upper
structure with two screws (1). Remember not to tighten the screws (1) until the top of the door
is level with respect to the upper structure.
10. Install the top cover in the part above the apparatus using the screws (6).
Before plugging in
Check that you have a socket which is compatible with the plug supplied with the appliance.
DO NOT SWITCH ON UNTIL FOUR HOURS AFTER MOVING THE APPLIANCE.
21
Publicité
