Publicité
Only use approved components
Design changes to the MiniFix or incorrect spare parts can cause malfunctions. These lead to
property damage or personal injury.
• Do not convert or modify the MiniFix.
• Only use original spare parts.
Working on the MiniFix
The impact wrench is live during operation. All work should only be carried out in a voltage-free state.
Danger from reaching in and being caught
During operation there is a danger to persons who reach into the drilling area or who are
wearing loose clothing.
• The work area must be freely visible.
• Clothing must be close-fitting – pay attention to shoelaces.
• Only hold the MiniFix by the handle provided.
Danger from ejected objects
During operation, wood material can be thrown out by the MiniFix.
• B efore starting work: Make sure that nobody is in the immediate vicinity of the MiniFix.
• Wear safety goggles or face shield.
Noise hazards
During operation, the operator is exposed to increased noise emissions – to wear ear protection.
– 16 –
Publicité
