Publicité
Maintenance
Service
Service of a charger requires extreme care and
knowledge. Service should be performed only by a
qualified service technician.
• Always check charger for damaged parts before use.
• Replace or repair damaged parts before use. Check
broken parts, mounting, and any other conditions that
may alter operation.
• Have damaged parts properly repaired or replace by an
Authorized Service Center.
• Maintain chargers. Keep chargers dry, clean, and free of
oil and grease for better and safer performance.
• For location of the nearest Snap-on repair center, call
Snap-on customer service at 1-877-762-7664.
• When charging or discharging a lithium-ion battery over
a short period of time, the internal temperature of the
battery pack increases substantially. This is normal.
• Under ideal working conditions the useful life of a lithium-
ion battery pack is around 1000 charge/discharge cycles.
Improper care and maintenance shortens battery life and
the amount of time the battery holds a charge.
• Use only with Snap-on charging equipment that
specifies a CTB series battery pack.
• Avoid short circuiting the battery pack. Permanent
damage to the pack can occur from high current
discharge.
ZCTC131CE Rev. B
• Unplug charger from outlet before starting the
disassembly procedure.
• Remove the battery pack from the tool before starting
the disassembly procedure. Short-circuiting the
battery pack can cause fire or personal injury.
• Use safety equipment. Always wear eye protection.
7
(11/18)
Publicité
