Publicité
Troubleshooting
5.2 Non-defect when the following conditions occur:
Error Code
White smoke at the exhaust
Water is not hot
The water heater suddenly
shuts down
Close the hot water valve, but
the fan cannot stop
immediately
After the water heater starts, it
does not
Can have hot water right away
After the water heater is
powered on, the controller
does not respond.
32
When the outdoor temperature is too low, the discharged smoke
encounters outdoor cold air and condenses into a white mist.
If the water flow is too low, the water will get cold.
The minimum water flow rate is required to be 0.6 gallons per minute.
Make sure the water heater is running smoothly.
When the water heater is timed, the water heater will automatically shut
down. Please wait for a while before using it.
This is a function to delay the fan off, so that the exhaust of the water is
finished.
Fully drained heaters that ensure user safety.
There is a distance from the water heater to the hot water tap, because the
water pipe.
It still takes some time to use the cold water in the cold water. Water and
hot water. The longer the pipeline, the more time it takes.
There is no power input, please check the circuit.
Possible Cause
Publicité
