Publicité
3.
STEAM IRONING - MAX
FUNCTION
3.1
Make sure that section 1 has been
completed and regulate the temperature of
the iron (6) as described in section 2.
3.2 Wait for the iron-heating indicator light
to go off (5).
3.3 Press the steam button (8) on the iron
to make steam come out of the holes on the
plate. Releasing the button, the flow stops.
Proceed to iron clothes in accordance with
the instructions above.
When first using the steam, there may be
some drops of water leaking out of the
plate. This is due to imperfect thermal
stabilization. We therefore recommend
that the first jet of steam be directed onto
a cloth.
The iron heating indicator light turns on
and off during use. This merely indicates
that the electric resistance is in operation:
continue to iron as normal.
4. STEAM IRONING - ECO
FUNCTION
The ECO function allows you to iron with
significant energy savings and at the same
time enjoy the best possible performance,
even on the more difficult fabrics (cotton/
jeans/linen).
To activate the ECO function, simply keep the
ON/OFF switch ( ) pressed and release it
after 3 seconds, the green indicator light
around the ECO button will turn on (9)
indicating the function is active. To disable the
ECO function, keep the ON/OFF switch ( )
pressed and release it after 3 seconds: the
green indicator light will turn off.
When first using the steam, there may be
some drops of water leaking out of the
plate. This is due to imperfect thermal
stabilization. We therefore recommend
that the first jet of steam be directed onto
a cloth.
The iron heating indicator light turns on
and off during use. This merely indicates
that the electric resistance is in operation:
continue to iron as normal.
5.
THE STEAM-JET STEAM BOOST
FUNCTION
(for the Polti Vaporella Simply
VS20.20 model only)
The
STEAM
BOOST
activated for simple and easy ironing: set
the temperature dial to the ••• position and
click twice on the iron button (8). A powerful
blast of steam will allow you to speed up and
improve ironing, even on heavy fabrics, and to
remove the most difficult creases.
If you wish to repeatedly activate the steam
jet, we recommend you wait until the iron
returns to maximum temperature.
6. VERTICAL IRONING
The iron may be used in the vertical position
to remove creases from fabrics and/or to
refresh the fabric fibres, eliminating any
residual odours.
Hold the iron in a vertical position, press the
button (8), and if permissible based on the
type of fabric, touch it lightly with the plate.
7.
DRY IRONING / DELICATE
FABRICS
Make sure that chapter 1 has been completed,
adjusting the temperature of the iron (6) to
the lowest temperature as in chapter 2 and
iron without pressing the steam button.
8.
OUT OF WATER
If the appliance is out of water, the red out-of-
water indicator light on the appliance will turn
on (10) and no steam will be produced.
To restart operations just fill the water tank
again as described in section 1.
9. CALC CLEANING SYSTEM
The Polti Vaporella Simply Calc Cleaning
system enables the removal of limescale,
thus guaranteeing a better supply of steam,
avoiding the leakage of stains or dirt from the
holes in the plate.
Running the Calc Cleaning cycle regularly
gives better performance and durability over
time. Run the cycle whenever the blue
indicator light around the ON/OFF switch ( )
flashes and when the appliance emits a beep.
In any case, it is possible to perform the
cleaning cycle at any time.
Before running the cleaning cycle, make sure
you have a large receptacle or bowl on hand
to collect the water, steam and limescale that
will come out from the iron during the process,
| 11 |
function
can
be
Publicité
