Publicité
CORRECT USE OF THE PRODUCT
Polti Vaporella Simply is intended for domestic
use as steam generator iron, with separate
tank in accordance with the descriptions and
instructions contained in this manual. Please
read these instructions carefully and keep
them. If this manual is lost, it can be consulted
and/or
downloaded
www.polti.com.
POLTI S.p.A. reserves the right to make the
aesthetic, technical and construction changes
it deems necessary, without prior notice.
Before leaving our factory all our products are
rigorously tested. Therefore, Polti Vaporella
Simply may already contain some residual
water in the tank.
Correct use of the product is only as detailed
in this instruction manual. Any other use may
damage the appliance and invalidate the
warranty.
WHICH WATER TO USE
Polti Vaporella Simply was designed to
operate with a mixture composed of 50% tap
water having a hardness up to 20° f and 50%
commercially-available demineralised water.
If the water used is particularly hard (above
20° f), excessive limescale could accumulate
in the appliance, if so use demineralised water
only.
Warning: check the hardness of the water at
the technical office at your local council or
the local water supplier.
Never use rain water or water containing
additives (e.g. starch, perfumes), perfumed
water or water produced by other domestic
appliances, water softeners and filter jugs.
Do not add chemical, natural, detergent, or
limescale removing substances, etc. Do not
use Polti Kalstop.
1.
PREPARATION FOR USE
1.1
Position Polti Vaporella Simply on a
stable, flat, heat-resistant surface.
1.2
Remove (1) and fill the tank with water
(2) up to the MAX line on the tank.
This step must always be carried out with the
power cable disconnected from the mains.
Thanks to the continuous refill system you do
not need to stop the ironing and wait for the
appliance to cool down because the tank can
be filled as needed.
1.3
Reinsert the water tank until you hear the
hook click.
1.4
Release the iron from the rest (see 11.4).
1.5
Connect the cable plug to an earthed
power supply of the correct voltage (3).
from
the
website
| 10 |
1.6
Make sure you have completely unrolled
the water hose.
1.7
Press the ON/OFF switch ( ) (4) once:
the continuous blue indicator light will turn-on
together with the iron heating light (5).
The sound emitted on your appliance during
use is due to the water refilling system and
is quite normal.
2.
IRON TEMPERATURE
ADJUSTMENT
Before ironing an item of clothing, always
check the symbols on its label, for the
instructions provided by the manufacturer.
Check, based on the following table, the most
appropriate type of ironing:
High temperature – cotton, linen:
Set the iron temperature adjustment knob to
the position •••
Medium temperature – wool, silk:
Set the iron temperature adjustment knob to
the position ••
Do not use steam.
Low temperature – synthetic, acrylic, nylon,
polyester:
Set the iron temperature adjustment knob to
the position •
Do not use steam.
- Do not iron
- Steam ironing and steam treatment not
allowed
WARNING: Do not use steam at medium and
low temperatures to prevent the leakage
of water from the plate. Delicate fabrics
such as wool, silk, synthetics may be steam
treated from a distance and vertically,
positioning the iron temperature dial to the
at maximum temperature (the ••• position).
Divide
the
laundry
symbols on the garment labels or according
to the kind of fabric. Always start ironing
with the garments that require the lowest
temperature, in order to reduce the waiting
times and avoid the risk of burning the
fabrics.
WARNING: Do not leave the hot plate on
any surface. Use the Polti Vaporella Simply
vertical rest, placing the rear part of the
iron directly onto the ironing board or
surface on which you are ironing (7). The
appliance also comes with a handy iron rest
mat (fixed) with non-slip pads designed to
withstand hot temperatures.
according
to
the
Publicité
