Publicité
LED Ember light button: Makes the
color on bottom effect gets changing.
NOTE: Ember color effect stays on until
power button is turned off.
NOTE: this fireplace is with memory
EMBER
function for LED ember lights.
LIGHT
LED Ember light brightness button:
Makes the LED ember lights on bottom
effect gets changing.
NOTE: LED Ember light brightness effect
EMBER
stays on until power button is turned off.
BRIGHTN
ESS
LED Down light button: Makes the
color on top gets changing.
NOTE: Down light color effect stays on
until power button is turned off.
DOWN
NOTE: this fireplace is with memory
function for LED ember lights.
LIGHT
HEATER button: Turns heater on and off.
NOTE: The heater only works when the
flame effect is on. If the flame effect is off,
the heater will not turn on.
NOTE: Heater button can be locked or
HEATER
unlocked by holding the Heater button for
5 seconds.
When the heater is first turned on, a slight odor may be present. This is normal and
NOTICE
should not occur again unless the heater is not used for a long period of time.
To improve operation, aim the remote control at the front of the fireplace. DO NOT
NOTICE
press the buttons too quickly. Give the unit time to respond to each command.
1. Press once. LED ember light color effect
gets changing.
2. Press again until desired setting is
reached. In total 13 colors for EMBER.
3. Auto-cycle function: When pressing with
the 14
auto-cycling (NOTE: It will take 15
seconds to switch between colors.)
1. Press once. LED ember light color effect
gets changing.
2. Press again until desired setting is
reached. In total 5 levels.
From b1 - b2 - b3 - b4 - b5 ( Pulsating)
4. Press once. LED down light color effect
gets changing.
5. Press again until desired setting is
reached. In total 13 colors for down-light.
6. Auto-cycle function: When pressing with
the 14
auto-cycling (NOTE: It will take 15
seconds to switch between colors.)
1. Press once. Indicator lights up.
Fan blows cool air for 10 seconds. 750W
heater turns on and blows warm air.
2. Press again. Indicator lights up.
1500W heater turns on and blows hot air.
3. Press again. Heaters turn off.
The fan blows cool air for 10 seconds to
allow heater to cool down, then turns off.
www.aflamo.com
th
time, the LED ember light will do
th
time, the LED down light will do
8
Publicité
