Publicité
Remote Control Operation
BUTTON
ON: Enables control panel functions and
remote control. Turns on flame effect.
OFF: Disables control panel functions and
remote control. Turns off flame effect.
POWER
1. Press once: Touch panel indicator becomes active.
2. Press again until desired setting is reached. Digital display shows settings:
TEMP
NOTE: Press the button for 5 seconds to switch between °C and °F
TIMER button: Controls timer settings to
turn off fireplace at selected time.
Settings range from 0.5 hours to 8 hours.
TIMER
Flame speed button:Controls the speed
of the flame.There are 3 flame speed
settings: 01 (slowest), 02 (Medium), 03
(fastest).
SPEED
Blue / Orange / Yellow flame button:
Controls flame brightness.
NOTE: this fireplace is with memory
function for flame brightness.
FLAME
FUNCTION
www.aflamo.com
ACTION & INDICATION
1. Press once. Indicator light turns on.
Power turns on. All functions enabled.
2. Press again. Flame effect turns off. Unit
goes to standby. All functions turn off.
1. Press once. Indicator light turns on.
Timer is set to 0.5 hours.
2. Press again until desired setting is
reached. Indicator lights show setting.
1. Press once. Flame speed gets changing.
2. Press again until desired setting is
reached. Display shows the setting.
The Default setting is 03 (fastest speed)
1. Press once. Flame brightness gets
changing.
2. Press again until desired setting is
reached.
F4 - F3 - F2 - F1 - F0 (OFF)
7
Publicité
