Preparation
This product includes a GLASS panel! Always use extreme caution when handling
glass. Failure to do so could result in personal injury or property damage.
Remove all parts and hardware from the carton and place them on a clean, soft, dry surface. Parts
and assembly steps are grouped for wall-hanging or recessing use. Check the parts list to make sure
nothing is missing. Dispose of packaging materials properly. Please recycle whenever possible.
You will need the following tools (not included): Phillips screwdriver; stud finder; level; tape
measure; electric drill; 1/4" wood drill bit, hammer.
Parts and Hardware
A - Fireplace
F-ST4*12
Installation and Assembly
Your appliance is a wall-mounted Select a suitable location that is not susceptible to moisture and is
away from drapes, furniture and high traffic areas.
MINIMUM CLEARANCE TO COMBUSTIBLES
Bottom
Sides
Back
G - Wall mount Brackets
Measurements are taken from the glass front.
0"
0"
0"
www.aflamo.com
B - Wood screws
D – Remote control
Top
Top
C - Drywall anchors
E - Crystals
H - Logs
11. 8" (300mm) to mantel
11.8" (300mm) to ceiling
3