Publicité
get
ready
IMPORTANT: Charge your Acuvibe for eight hours
before using it the first time.
1. Make sure the power switch is set to OFF.
2. Connect the charger cord to the charging jack at the end of the
Acuvibe, then plug the charger into a wall outlet. The charging
LED lights, indicating that the Acuvibe is charging.
NOTE: The total run time is dependent upon the charge level,
temperature (lower temperatures result in shorter run times)
and the amount of pressure applied during the massage.
IMPORTANT:
IMPORTANT: Completely drain the battery and re-charge it for
IMPORTANT: Completely drain the battery and re-charge it for
16 hours once each month.
8
Power Switch
Acuvibe
Charger
9
Charging Light
Publicité
