Publicité
MAINTENANCE
CAUTION:
Always be sure that the tool is
switched off and the battery cartridge is removed
before attempting to perform inspection or
maintenance.
NOTICE:
Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.
To maintain product SAFETY and RELIABILITY,
repairs, any other maintenance or adjustment should
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.
COMBINATION OF APPLICATIONS AND ACCESSORIES
Optional accessory
CAUTION:
Using the tool with incorrect guards can cause risks as follows.
•
When using a cut-off wheel guard for facial grinding, the wheel guard may interfere with the work-
piece causing poor control.
When using a grinding wheel guard for cutting-off operations with bonded abrasive wheels and dia-
•
mond wheels, there is an increased risk of exposure to rotating wheels, emitted sparks and particles,
as well as exposure to wheel fragments in the event of wheel burst.
When using a cut-off wheel guard or grinding wheel guard with a wheel-type wire brush with a thick-
•
ness greater than the maximum thickness as specified in "SPECIFICATIONS", the wires may catch on
the guard leading to breaking of wires.
Use of dust collecting wheel guards for cutting-off and facial operations in concrete or masonry
•
reduces a risk of exposure to dust.
2
3
4
-
1
2
3
2
5
Air vent cleaning
The tool and its air vents have to be kept clean.
Regularly clean the tool's air vents or whenever the
vents start to become obstructed.
► Fig.25: 1. Exhaust vent 2. Inhalation vent
Remove the dust cover from inhalation vent and clean it
for smooth air circulation.
► Fig.26: 1. Dust cover
NOTICE:
Clean out the dust cover when it is
clogged with dust or foreign matters. Continuing
operation with a clogged dust cover may damage the
tool.
1
6
7
Application
-
-
Grinding / Sanding
16 ENGLISH
9
8
2
10
7
125 mm model
Side grip
Wheel guard (for grinding wheel)
Depressed center wheel / Flap disc
Publicité
