Télécharger Imprimer la page

Livington Smart Air Mode D'emploi page 5

Masquer les pouces Voir aussi pour Smart Air:

Publicité

IMPORTANT SAFETY INSTRUCTIONS:
• Retain these instructions for future reference.
• This appliance contains batteries that are non-replaceable.
• The appliance may be used by children who are 8 years of age or older
and by people with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, but only if they are supervised
or have been adequately instructed on the safe use of the appliance
and the hazards involved. Children must never be allowed to play with
the appliance. Cleaning and maintenance may only be carried out by
children under adult supervision.
• The appliance may only be charged using the power supply/adapter
provided. Accessories not included in the scope of delivery must not
be used.
• Only use on the radiator. Do not cover the intake and exhaust air
openings.
• Do not use on radiators that can reach a temperature of over 70°C.
BEFORE USING FOR THE FIRST TIME, PLEASE NOTE:
This product is designed to be placed on a flat radiator. If your radiator
does not have a flat top, the performance of the unit may be lower.
Fully charge the appliance before using it for the first time.
IMPORTANT: The appliance can also be connected to the mains
during use (please use the included adapter).
PRODUCT INFO:
This appliance is ideal for double convection radiators as well as
most cast iron style radiators and classic wall-mounted radiators
(#3a).
This appliance is not suitable for oil-fired heaters, heated towel
rails, electric heaters or fireplaces (#3b).
Heat distribution: The distribution of heat depends on the room size,
room height and air draught. For a larger room volume, for example in
open-plan living concepts, you may need two appliances to achieve
the desired heating effect.
FIRST STEPS
Setup:
For best performance, the product should be placed flat in the center
of the radiator, making sure that the bottom of the unit and the top of
the radiator are parallel. The "lip" on the front of the appliance should
protrude above the radiator (as also shown in #4) and be as close
to the front as possible. Always make sure that the safety magnet
touches the top of the radiator so that it cannot fall off.
Optional - Installation of the fixing clams #5
The fixing clamps are OPTIONAL and intended for use with flat
radiators or radiators WITHOUT sufficient surface area to
provide support. This is to prevent the appliance from tipping
forward and falling off the radiator.
INSTALLATION:
• First adjust the distance between the fixing clamp and the radiator.
• To attach it, insert the fixing clamp into the opening on the
appliance (i). Info: There are openings on the left and right.
• Now place the appliance on the radiator and fix it with the
fastening clamp.
M37112_Livington_SmartAir_Manual_20240611_OH.indd 5
M37112_Livington_SmartAir_Manual_20240611_OH.indd 5
EN
FUNCTIONS OF THE APPLIANCE:
Speed switch:
Here you can set the ventilation level according to your needs:
• High (II)
• Low (I)
• Off (0)
IMPORTANT: TO TURN ON THE APLLIANCE, the speed switch
must be set to High (II) or Low (I).
Automatic mode & manual mode:
You can choose between automatic mode and manual mode,
according to your requirements:
• (A) = Automatic mode - automatic switching on and off from
approx. 33/34°C
• (M) = Manual mode
Automatic mode: ONLY works when the temperature of the radiator
exceeds approx. 33/34°C (until the appliance's battery is empty):
» Switch the mode switch to (A)
» AND the speed switch to High (II) OR Low (I).
Manual mode: works independently of temperature in continuous
operation (until the appliance's battery is empty)
» Switch the mode switch to (M)
» AND the speed controller to High (II) OR Low (I).
Switching off the appliance:
Simply set the speed switch to 0 and the appliance switches off
completely.
Display:
Shows the radiator temperature, the charge level of the appliance, and
the fan setting:
• °C - degree, e.g. 35°C is the radiator temperature
• % - Battery charge level
• Hi/Lo - Setting the fan speed
CARE AND MAINTENANCE
Only clean this product by wiping. Avoid using cleaning agents.
TECHNICAL DATA: Voltage: 5V⎓ 2A Power: 10 W
5
11.06.24 13:30
11.06.24 13:30

Publicité

loading