Publicité
05
Non-condensing cooling - close the drain pipe of the condensate
trap (02cm).
Incorrect installation and failure to follow the instructions can lead to severe water damage.Perform maintenance according
to the intensity of use and the installation environment.Therefore, Jaga N.V. shall not be liable for any consequential damage
whatsoever.Read these instructions carefully..
06
see 3. Electrical connection
08
Secure the safety cables by tightening the wing bolts.
JAGA NV | BRIZA M - BASIC | MANUEL | 18.10.2024 | V.1.07
Condensing cooling - Install the condensate drain. The condensa-
te drain system should be fitted with a siphon to prevent odours.
The siphon can be either on the unit or on the final condensate
connection (downstream from the condensate trap). Pour water
into the condensate trap and check that it drains normally. If not,
check the drain angle.
07
Hook the front plate into the holes provided.
09
CLICK
Clip the front plate with the spring clips.
EN
63
Publicité
