Publicité
CONNECTING TO A TV USING A DIGITAL OPTICAL CABLE
1. Connect the DIGITAL AUDIO IN (OPTICAL) jack on the Soundbar to the OPTICAL OUT jack of the TV with a
digital optical cable.
2. Press the
button on the right side of the Soundbar or the SOURCE button on the remote control to select
the D.IN mode.
+ Auto Power Link
If you have connected the main unit to a TV with a digital optical cable, you can set the Auto Power function ON
to have the Soundbar turn on automatically when you turn the TV on.
1. Connect the Soundbar and a TV with a digital optical cable.
2. Press the
button on the main unit's right side or the SOURCE button on the remote control to select the
D.IN mode.
3. Press the button on the remote control for 5 seconds to turn Auto Power Link on or off.
● Auto Power Link is set to ON by default.
● Depending on the connected device, Auto Power Link may not function.
● This function is only available in the D.IN mode.
TV SOUNDCONNECT
You can enjoy TV sound through your Soundbar when it is connected to a Samsung TV that supports the
TV SoundConnect function.
1. Turn on the TV and Soundbar.
2. Press the
button on the main unit's right side or the SOURCE button on the remote control to select the TV
mode.
3. On the TV, a message asking whether to enable the TV SoundConnect function appears.
4. Select <Yes> using the TV's remote control to finish connecting the TV and Soundbar.
Optical Cable
OPTICAL OUT
Connect
DIGITAL AUDIO IN
(OPTICAL)
DIGITAL AUDIO IN
(OPTICAL)
HDMI IN
DIGITAL AUDIO IN
DC 24V
(OPTICAL)
USB (5V 0.5A)
Wi-Fi SETUP
SPK ADD
HDMI OUT
(TV-ARC)
AUX IN
21
CONNECTIONS
Publicité
