Publicité
4.2.3
Installing the ventilation pipe
If provided, push ventilation pipe onto the connection
socket.
4.2.4
Establish pressure pipe connection
KESSEL recommends using the enclosed adapter with
thread change. If this is not used, the pressure pipe connec-
tion can be bonded as follows:
Clean the bonding surfaces.
Apply PVC adhesive on the bonding surface of the
pressure pipe connection socket.
If required, push on bonded socket or adapter with
thread change (1 1/2").
If necessary, install pressure pipe after applying the
PVC adhesive.
Observe the usage instructions and drying time for the
adhesive!
Installation and operating instructions
27 / 116
Publicité
