Publicité
Operation instructions for controller
Click the middle position of the lower sidebar of the screen to set the functions of listed in the table below
Functions of user setting
Function
Force Defrost
Heater1 Electric Heating
Heater2 Electric Heating
Note:
① Do not use the system during sterilization in order to prevent scalding with hot water, or overheating of shower.
② Quiet function and Turbo function cannot be turned on at the same time.
③ Depending on the customer's actual needs and the on-site installation of heater1 and heater2, it can only take effect
after being set in the wired controller
4) Installation
Tap "INSTALLATION" icon in Picture 17, then prompts to enter password interface.
Enter the correct password (841226), go into Picture 22.
Parameter Range
On/Off
Auto/Forced ON/Forced OFF
Auto/Forced ON/Forced OFF
Picture 21
Picture 22
Default
Off
Auto
Auto
44
Remarks
Each ODU is controlled separately
Each ODU is controlled separately
Each ODU is controlled separately
Publicité
